Cleaning Water with Iron Filters in Ipswich
We have found the Shakesby range of filters to be the best on the market and the results obtained from these filters have pushed the competition to one side. For quality and peace of mind there really is only one choice and that’s the Shakesby there is a filter for every application and units can be custom made for your needs.
We will supply and install Shakesby iron filters to home owners, farmers and industrial applications are not a problem. When you contact us we will assess your needs, offer free expert advice and follow up with an estimate for your project. A recent water sample will be required to select the correct equipment for your needs and possible model testing to ensure the equipment is working as intended.
EB Range – Small Domestic Usage
These are for low volume requirements such as a single household with a supply containing less than 5000µg/L of iron. They are fitted into a pressurised untreated supply line. Routine maintenance is simple and can be carried out by the user.
System: Treats the required water from a pressurised supply.
Iron level: Up to 5000ug/l (5mg/l) depending on site conditions.
Filter Media: SIRM
Backwash Frequency: 2-7 days (dependent on site conditions).
| Model | EB1354 | EB1665 | EB1865 |
|---|---|---|---|
| Max. Rec. Flow rate | 1.3 | 2.0 | 2.5 |
| Backwash flow rate | 1.135 | 1.589 | 2.7 |
| Dimensions (H x W) | 64”x15” | 75”x17” | 78”x19” |
All Flow rates in m3/hr. Supply pressure min.2 bar max. 4bar.
ET Range – For Domestic and Industrial Usage
This range suits all sizes of domestic properties and small industrial sites, treating all the water from a borehole pump. They continually aerate the water in service and use air and water to backwash. This means they can cope with higher iron and hydrogen sulphide (rotten egg smell) levels, higher flow rates and use about half the service flow rate to backwash. Fully integrated filters contain all the aerating and venting components in one unit.
System: Treats all water from source pump to storage or point of use.
Iron level: Up to 30000ug/l (30mg/l) depending on site conditions.
Filter Media: SIRM
Backwash Frequency: 2-7 days (dependent on the nature of the water).
| Model | EB1354 | EB1665 | EB1865 |
|---|---|---|---|
| Max. Rec. Flow rate | 1.3 | 2.0 | 2.5 |
| Backwash flow rate | 0.6 | 0.8 | 1.1 |
| Dimensions (H x W) | 64”x18” | 75”x18” | 78”x19” |
All Flow rates in m3/hr @ 3 bar
SVET/D Range – Where Untreated supply is Also Required
The SVET/D are designed to operate with pressurised untreated supplies where untreated water is used in addition to the filtered supply. This range suits all sizes of domestic properties and small industrial sites, treating all the water from a borehole pump. They continually aerate the water in service and use air and water to backwash. This means they can cope with higher iron and hydrogen sulphide (rotten egg smell) levels, higher flow rates and use about half the service flow rate to backwash. Fully integrated filters contain all the aerating and venting components in one unit.
System: Treats water from pressurised supply, maintaining an untreated supply.
Iron level: Up to 30000ug/l (30mg/l) depending on site conditions.
Filter Media: SIRM
Backwash Frequency: 2-7 days (dependent on the nature of the water).
| Model | SVET/D1354 | SVET/D1665 | SVET/D1865 |
|---|---|---|---|
| Max. Rec. Flow rate | 1.3 | 2.0 | 2.5 |
| Backwash flow rate | 0.6 | 0.8 | 1.1 |
| Dimensions (H x W) | 64”x18” | 75”x18” | 78”x18” |
All Flow rates in m3/hr @ 3 bar
Want more information? Complete our form and send it it in so we can generate a quote for you!